Found (7) products in: "Evaporator"
Advantages
Slimline design
Even air distribution
Low draught air level
Aligned tube pattern, large heat-exchanging surface
Many design types
Easy to install
Mounted on pallet in installation position
Ceiling mounting brackets for easy installation
Empty tube for defrost sensor
Easy-to-remove side cover
Schrader valve on outlet
Fans wired on connection socket (optional)
Inspection and Cleaning
Hinged tray
High Operational Reliability and Leak-Safety
Proven Güntner floating coil principle (refrigerant carrying tubes do not make contact with the casing,increases the heat exchanger’s service life)
Advantages
Casing for floor mounting
Fans with high air output and external pressure
Blow through fans ensure uniform air distribution over the cooled or frozen goods
Easy to install
8 different unit sizes available
Easy floor installation
Empty tube for defrost sensor
Schrader valve on outlet
Inspection and Cleaning
Hinged fan doors on request
High operational reliability and leak-safety
Proven Güntner floating coil principle (refrigerant carrying tubes do not make contact with the casing, increases the heat exchanger’s service life)
Efficient, Easy Operation
High efficiency due to optimal airflow routing
Excellent reliability due to simple construction
Advantages
Special design for draught-free air distribution
Air suction from above
Dual air discharge
Low noise emissions due to low-speed fans
Easy to Install
Adjustable ceiling mounting brackets for easy installation
Fans wired on connection socket
Empty tube for defrost sensor
Schrader valve on outlet
Inspection and Cleaning
Large, hinged drip trays with quick-release fasteners allow for easy access to all components
Easy inspection and cleaning
Advantages
max. operating pressure up to 80 bar (only CX-units)
Ceiling mounting with slottedhole for easy installation
Quick and easy to clean
Short delivery times
Easy to install
Easy to install
Ceiling mounting brackets with slotted hole for easy installation
Easy-to-remove side cover
Fans wired on connection socket
Empty tube for defrost sensor
Schrader valve on outlet
Inspection and Cleaning
Corrosion-resistant aluminium alloy AlMg
Powder coating in RAL 9003
Inner and outer trays hinged
Outer tray is thermally decoupled to prevent water condensation
HACCP Hygiene Certificate
Especially suitable for processing rooms in foodstuffs industry
All materials used approved for foodstuffs
Easy to clean
Advantages
Flat design
Even air distribution
Low draught air level
Units kept in stock ensure short delivery times
Easy to Install
Ceiling mounting brackets with slotted hole for easy installation
Fans wired on connection socket
Empty tube for defrost sensor
Easy-to-remove side cover
Only one condensation drain per unit
Schrader valve on outlet
Inspection and Cleaning
Hinged tray and heating sheet, drain line does nothave to be dismantled
Advantages
Robust design
Suction fans, wide air throw
Large variety of types
Many design types
Easy to Install
Ceiling mounting brackets for easy installation
Empty tube for defrost sensor
Side cover with hinges and quick-release fastener
Schrader valve on outlet
Inspection and Cleaning
Hinged tray
HACCP Hygiene Certificate
Suitable for rooms used for food processing
All materials used approved for foodstuffs
Drip tray with edges inclined at 45° angle
Easy to clean
High Operational Reliability and Leak-Safety
Proven Güntner floating coil principle (refrigerant carrying tubes do not make contact with the casing; increases the heat exchanger’s service life)
Heat Exchanger
Aligned or staggered tube pattern •
Special copper tubes for HFC, coolant and CO2
Stainless steel tubes for NH3 or steel, hot-dip galvanised
Surface-corrugated aluminium fins for high heat transfer
Casing
Corrosion-resistant aluminium alloy AlMg up to 500 mm fan diameter
Galvanized steel, from 710 mm fan diameter
Powder-coated with RAL 9003
Hinged side cover with hinges
Fans positioned at an angle (from 710 mm) improve the air throw and defrosting behaviour
Tray
Hinged and thermally-decoupled (condensation free)
Separate drip plate
Corrosion-resistant aluminium alloy AlMg
Powder-coated with RAL 9003
Large condensation drain with 45° incline
Fans
Proven quality fans
Standard with two speeds (for fan diameter of 500 mm)
Motor protection with thermocontacts •
230 V, 1~, 50 Hz or 60 Hz (up to construction size 450) •400 V, 3~, 50 Hz or 60 Hz• Wired on connection socket in factory (GHF)
Product Types / Refrigerant / Capacity